Furious True-D

Furious True-D Diversity Goggle Receiver Review

Furious True-D Goggle Diversity Receiver

[x_video_embed type=”16:9″][/x_video_embed]
I’ve been using the Furious True-D diversity receiver for the past 3 months and I love it.  This is one of those products you use, love and want to tell everybody about it.

What is the Furious True-D?  The Furious True-D is a plug-and-play receiver module for FatShark Goggles that offers receiver diversity.  What is a receiver diversity?  A diversity receiver is basically a receiver module that has two receivers with two antennas.  The module compares the signals from both receivers and chooses the one that has the best signal at the time.  The best part is that it switches back and forth seamlessly giving you the best image possible.

  • True Diversity (two receivers)
  • Accepts two antennas
  • Seamless switching between the two receivers
  • 40 channels with RaceBand
  • Plug and play – install takes under 1 minute including screwing in the two antennas
  • Multiple modes – Auto, Manual and Working Modes (See below on modes)
  • Built in LCD screen
  • Female SMA connector
Functionality and Modes

furious fpv true-d

The Furious True-D has a built in LCD with a three way switch (up, down and press).  If you are switching from the FatShark Raceband Module the LCD and setup may look confusing at first but it’s really simple.  There are three modes:

  1. Working Mode (default) – Let’s you save up to 8 channels.  To save a channel simply press and hold the switch for 2 seconds.  Handy if you have multiple quads running different frequencies.
  2. Auto Mode  – Move the switch up/down and it will lock on to any frequencies it detects.  Great for watching other people fly at the track.  Scroll through to see what everyone is seeing with a flick of the switch.
  3. Manual Mode – Manually change to specific frequency.

Switching from the standard FatShark 5.8ghz RaceBand Module, at first I was annoyed by how the channel switches didn’t work on the goggles anymore.  It also doesn’t automatically save the last channel you used before you powered off.  I didn’t like it at first but now I like it.  With the Furious True-D you have to save the channel if you want it to remember next time you power up.  To save the channel just press and hold the switch down for two seconds.  This is good for the track.  You can save your channel so it will come up everytime you power up.  But between your races you can use Auto Mode and watch other people fly.  When it’s your turn to race again, simply power up and it will bring up your track channel assignment.  No more flipping through the channels or messing with dip switches hoping you have the correct one.  The LCD screen tells you exactly what channel you are on.


I can’t make a post about goggle receivers without mentioning LaForge.  I’ve been trying to get some for the past month to do a comparison but they are never in stock.  So let’s just break it down.  The LaForge is another diversity receiver that comes in two parts you need to buy separately, Main Receiver Module $70 and Diversity Module $40.  So for the Laforge Diversity setup costs $110 without the antennas.  Both the Furious True-D and LaForge have similar features.  From the various posts and reviews I’ve read online the performance is about the same.  Some people give the edge to LaForge and some Furious True-D.  But more people favor the Furious True-D.

Furious True-D

*Main module is $70, diversity module add on $40

**requires the $40 diversity module

Advantages and Disadvantages

The major advantage the Furious True-D has over the LaForge is the install.  To install the Furious True-D you just plug it in, screw in your antennas and go.  Installs in under 1 minute.  Done, go fly.

The LaForge has two separate modules that you “install” on opposite sides of the goggles with a bundle of wires hanging across your goggles.  By install they mean the diversity module hangs outside of the goggles.  Huh?  You can hide the bundle of wires but you have to open up your goggles and cut away a part of the frame.  If you mess this part up you’ll end up with light leaks inside your goggles.  No thanks.  I prefer spending this time flying rather than opening up a $400 pair of goggles cutting parts out with a heated blade.

The only advantage I can maybe argue for the LaForge is the receivers are on opposite sides of the goggles.


In this test I’m flying a QAV-X with the Foxeer TM200 200mw VTX with the HS1177 camera and the TBS Triumph antenna.  The True-D will be using a 8dBi ImmersionRC patch antenna and the TBS Triumph.  The FatShark 5.8ghz 32channel Raceband module will only be using the TBS triumph.  The goggles are FatShark Dominator V3‘s.

In this test I’ll try to simulate a real world scenario in a simulated race course.  I’ll be sitting under a tree.

Path 1 is in the parking lot with trees and tall light posts.  You can always count on these tall light posts to cause interference.  I’ll focus on the areas circled as these are the areas with most interference.

Path 2 is a out in the open but a bit further away with even taller light posts.  The circled area in path 2 is behind a building.

furious fpv true-d

Watch the video above for the test flight footage.


As you can see in the video, the Furious True-D gives you an overall cleaner image especially when the signal has to go through trees or buildings.  Keep in mind in this test video I’m flying by myself.  The True-D really show’s it’s ability for delivering a clear video when you are flying with other quads.  An easy plug-n-play receiver module.  For $80 I highly recommend the Furious True-D.

If you found this post helpful, it would be super cool if you purchased the components from my store or purchase items from my Amazon links.  These posts are expensive and take a loooong time to make!  The purchases make it possible for me to keep making them.  Thanks in advance, I greatly appreciate it 🙂





14 responses to “Furious True-D Diversity Goggle Receiver Review”

  1. Dave Cagle Avatar
    Dave Cagle

    Thank you so much for this article. Currently trying to decide between the two. I made the choice now. ?

    1. FlightClub Avatar

      you won’t be disappointed 🙂

  2. fpvopen Avatar

    where to buy?

    1. FlightClub Avatar

      Click on any True-d link on this post. They are available in the store

  3. Paul Tomaszewski Avatar
    Paul Tomaszewski

    Im not sure what im doing wrong mabey you can help. Im getting alot of static and the video is worse then the regular nexwave. I have the same set up. Triumph antenna and immersion rc patch. On my vortex 250 and I auto search the channel and the video pops up but theres so muxh static. What am i doing wrong?

    1. FlightClub Avatar

      make sure both the vtx and rx are on the exact same band and channel. sometimes you will get an image then you go fly and it looks like garbage. it’s because there is a frequency mismatch. sometimes you will get an image even if you are not on the same channel but on one that’s close.

      1. Paul Tomaszewski Avatar
        Paul Tomaszewski

        Ok I will double check and make sure band and channel are the same. I have no idea how anybody can fit the triumph antenna and patch on the receiever without a 45 degree connector or extender. I tried and cant get the antenna to line up and screw on with the patch in the way. Also when the cover is fully pressed down onto the goggles and reciever my button gets stuck. I have to slightly pull the cover away from the receiver and goggles so I can push the button in and have it release out properly. Is it possible I could have got a fake? Auto search is a feature that automatically finds band and channel right? So why doesnt it?

  4. Peter Walker Avatar
    Peter Walker

    I currently own a set of Skyzone V2 FPV Goggles and like them pretty good. They are a bit small I feel like for my face but I do okay with them. They are my first set. If you were to recommend a set of FPV Goggles to someone completely new, what would you recommend?

    1. Brad Turbo Ivie Avatar
      Brad Turbo Ivie

      Well did you ever get an answer to this question?? For at this VERY moment I am looking to purchase some new ones, I have the Aomway Commander V1’s and LOVE them and love the 16:9 ratio as well….That being said, I am having some trouble with them now five or six months in (I think) I haven’t searched ALL the possibilities just yet but have switched antenna’s and it didn’t really help to much so I have ruled out my TBS antenna’s being bad or shorted?? And it does it with all quads so not the camera with those two things ruled out I feel it may be a default in the commanders and that IS sad for they are an awesome alternative to the overpriced Fat Shark’s. Although that being said… Aomway’s don’t have good customer support and if I in fact have to purchase new goggles will go with some form of Fat’s and really do not know which ones have watched many reviews and many do not like the HD3’s as well as the HD2’s and MANY prefer the V3 non HD but with an HDMI to be the better goggle for the 16:9 ratio and that is kind of what I am leaning toward? I think? I love the 16:9 I’m just a tad concerned about field of view it is only 30 degrees with the V3’s I believe I’ll have to check and see what the commanders are but if they are close they’ll be fine for me. I was just wondering if they ever made a judgement on this question for you as I would like to know as well!!! Thanks, See ya!- Turbo.

  5. fernie Avatar

    will you damage it if you power the receiver with only one antenna?

    1. FlightClub Avatar

      It’a a receiver not a transmitter so I think it will be ok.

      1. Brad Turbo Ivie Avatar
        Brad Turbo Ivie

        HEY DANG IT!!?? lol Are you going to answer poor Fernie up there or what?? I’m lookin myself for if you’ll read above you’ll know why, I got some of the Aomway’s and love them a great deal and they are very good, BUT having some kind of reception issue and do NOT know for SURE if it is the goggle getting older (five or six months) or it is another issue, but have found Aomway’s customer service is a little to be desired so if I in fact do have to purchase some new goggles need to try and decide on which Fat Sharks to get for ME. As I have watched and watched MANY reviews of the Attitudes from the first ones to the V4 and they are a definite NO for me, one antenna one rx is not good for me! And most not all but most of the ones I have watched on the HD3’s say if you have the V3’s or the HD2’s they would not upgrade for the expense is just not there. So that leaves me with the V3’s or the HD2’s if I can find a set. So How about some feedback on this subject for I myself am very interested in knowing your people’s opinion of those two anyway and give me pros and cons of EACH. For I do know that the field of view is a bit more with the HD2’s BUT they are 4:3 aspect ratio, and I prefer the 16:9 the small amount of stretching does not bother me at all, I love that about the Aomways and have thought about just purchasing another pair but Fat has cusomr service!! Aomway not so much as so if something is wrong or goes wrong it’ll be fixed!! So boys? WHICH ONES ARE FOR ME??? Talk to me!! L8r-Turbo.

      2. Brad Turbo Ivie Avatar
        Brad Turbo Ivie

        OH DANG IT! revision!!! I know I said Fernie… I misread I mean Peter Walker’s question…Forgive me lol THX-Turbo.

  6. aaron Avatar

    Would this also work with the Fatshark Attitude V3?

Leave a Reply

Your email address will not be published. Required fields are marked *